3304-BD-2HRS-TVH-C3, FAG Double Row Angular Contact Bearing, Sealed

£27.07 ex.VAT


3304-BD-2HRS-TVH-C3, FAG Double Row Angular Contact Bearing, Sealed

Manufacturer: FAG

Seals/Shields: Lip seals on both sides

Clearance: C3

Quality: Premium

X-LIFE: Fag XL series are exceptional quality and long lasting

Cage: TVH – Solid polyamide snap cage, ball-guided

BD : Modified internal construction, angle 30 Degrees, Without filling slot

Limiting Speed(RPM) 13,000

Dimensions: 20x52x22.2 (mm)

Inside Diameter: 20mm
Outside Diameter: 52mm
Width: 22.2mm

Alternate Product Codes (can be used in place of): 3304 2RS1ATN9 SKF, 3304 2RS, 3304A-2RS1TN9/C3MT33

Additional information

Weight 220 g
Dimensions 20 × 47 × 20.6 mm
Common Applications

General Engineering, Gearboxes, Automotive, Agriculture

Further Information

Double row angular contact ball bearings are units with solid
inner and outer rings and ball and cage assemblies with polyamide
or sheet steel cages. Their construction is similar to a pair of single
row angular contact ball bearings in an O arrangement but they
are narrower to a certain extent.
The bearings are available in open and sealed designs.
Due to the manufacturing processes used, open bearings can have
turned recesses in the outer ring for seals or shields. Sealed bearings
are maintenance-free and therefore allow particularly economical
bearing arrangements.
Due to the raceway geometry and the two rows of balls,
the bearing can support forces in both radial and axial directions.
They are therefore particularly suitable for use in pumps and
agricultural machinery. Furthermore, double row angular contact ball
bearings are used in applications including conveying equipment,
packaging equipment, elevators and compressors.
The angular adjustment facility of angular contact ball bearings is
very limited. The adjustment angle should not exceed 2.
Bearings of X-life quality have improved running accuracy and
optimised surfaces. This gives a significant increase in the fatigue
limit load of the bearings. In terms of the expanded adjusted rating
life, values up to 50% are achieved. In certain applications,
this means that a smaller bearing arrangement can be designed.

Pin It on Pinterest